Craftsmen Training Scheme

  • Study Material
  • Employability Skills
  • Question Bank
  • Mock Test
  • QP and Curriculum
  • E-Learning

Plastic Processing Operator Ebooks

Trade Practical

Trade Theory

Engineering Drawing

Plastic Processing Operator Videos

Disposal of Waste Material Part-1

courtesy :QR videos

Disposal of Waste Material Part -2

courtesy :QR videos

Personal Protective Equipment Part-1

courtesy :QR videos

Personal Protective Equipment Part-2

courtesy :QR videos

Rescue and Treat a Person Who is in Contact with a Live Wire | Part-1

courtesy :QR videos

Safety Practice - Fire Fighting

courtesy :QR videos

Safety Practice - Safety Signs

courtesy :QR videos

Safety Practice - Road signs & Road signals V Out

courtesy :QR videos

Safety practice first aid treatment of electric shock treatment for electric burn and serve bleeding

courtesy :QR videos

Standard and Standardisation | Part - 1

courtesy :QR videos

Standard and Standardisation | Part - 2

courtesy :QR videos

Conductors and Semiconductors

courtesy :QR videos

Response to Emergencies - Power failure, System failure & Fire

courtesy :QR videos

Importance of Safety

courtesy :QR videos

Importance of Housekeeping

courtesy :QR videos

Safety practice first aid treatment of electric shock treatment for electric burn and serve bleeding

courtesy :QR videos

Communication skills

courtesy :NIMI

7 habits of highly effective people (personality development)

courtesy :NIMI

Interview Techniques

courtesy :NIMI

Stress Management

courtesy :NIMI

Transactional analysis

courtesy :NIMI

Plastic Processing Operator Question Bank

Employability Skills - 1st Year

Employability Skills - 1st Year



Plastic Processing Operator (Set - 1)

Plastic Processing Operator (Set - 1)



Plastic Processing Operator (Set - 2)

Plastic Processing Operator (Set - 2)



Plastic Processing Operator (Set - 3)

Plastic Processing Operator (Set - 3)




Mock Test for ITI Students

ITI CBT Exam process | ITI CBT Exam कैसे करें
Plastic Processing Operator

Courtesy :DET Haryana



S.No. Week No. / Chapter Topics Videos Link
1 1 Week / LEARNING OUTCOME  Departmental training schemes (CTS/ATS). https://youtu.be/07dPb68A0UQ
2 1 Week / LEARNING OUTCOME  Importance of safety & rules https://youtu.be/qMP9vSY7Fd0
3 1 Week / LEARNING OUTCOME  Introduction about occupational health hazards followed in plastic industries https://youtu.be/Ww2UM19Szfs
4 2 to 3 Week / Check and perform measuring, marking,Hack sawing, filling by using various measuring, marking,cutting and finishing  tools. Linear measuring Tools (Steel Rule ) https://youtu.be/cBcsA_3VV60
5 2 to 3 Week / Check and perform measuring, marking,Hack sawing, filling by using various measuring, marking,cutting and finishing  tools. Punching Tools https://youtu.be/nNToptuOIG0
6 2 to 3 Week / Check and perform measuring, marking,Hack sawing, filling by using various measuring, marking,cutting and finishing  tools. Sawing Tools https://youtu.be/_r7Hq8X8waQ
7 4 to 5 Week / Check and perform drilling, tapping, dieing by using different related tools Drilling machine and its types https://youtu.be/jce8y8Dy7W4
8 4 to 5 Week / Check and perform drilling, tapping, dieing by using different related tools Types of drill https://youtu.be/jce8y8Dy7W4
9 4 to 5 Week / Check and perform drilling, tapping, dieing by using different related tools Operation Done of Drilling Machines https://youtu.be/jYGNSIuAcTk
10 4 to 5 Week / Check and perform drilling, tapping, dieing by using different related tools Tool’s used in internal threading Tap&Tap wrench https://youtu.be/FCxA-XbkvzQ
11 4 to 5 Week / Check and perform drilling, tapping, dieing by using different related tools Tools used in external threading Die& Diestock https://youtu.be/BZtueocxFMc
12 4 to 5 Week / Check and perform drilling, tapping, dieing by using different related tools Introduction to precision measuring instruments https://youtu.be/rddQmcNk1w4
13 4 to 5 Week / Check and perform drilling, tapping, dieing by using different related tools Micrometer https://youtu.be/imEqHCW5-o
14 4 to 5 Week / Check and perform drilling, tapping, dieing by using different related tools Height gauge https://youtu.be/rNi7moCtJ8o
15 4 to 5 Week / Check and perform drilling, tapping, dieing by using different related tools Bevel protector https://youtu.be/UE9e7r1T9AA
16 6 Week / Test and perform basic Electrical earthings with the accessories fitting on board Definition of electrical Quantities an its units  http://youtu.be/to-RFIWK290
17 6 Week / Test and perform basic Electrical earthings with the accessories fitting on board Ohms Law http://youtu.be/Ccr8B0SUBIs
18 6 Week / Test and perform basic Electrical earthings with the accessories fitting on board Types of circuits and its connection  http://youtu.be/D6NB5FaKYwM
19 6 Week / Test and perform basic Electrical earthings with the accessories fitting on board Types of Earthing  http://youtu.be/4bkpb8Gb1m4
20 6 Week / Test and perform basic Electrical earthings with the accessories fitting on board Electric  Symbos http://youtu.be/URZNOi17kjY
21 7 to 8 Week / Identify different Plastic materials and test the properties of material by using various test apparatus Introduction of plastic Group of plastic https://youtu.be/jmtw-OdHEwI
22 7 to 8 Week / Identify different Plastic materials and test the properties of material by using various test apparatus Identification of plastic. http://youtu.be/K3TL5k243YU
23 7 to 8 Week / Identify different Plastic materials and test the properties of material by using various test apparatus Commodity, Engineering,Speciality http://youtu.be/9f32TZ0F1ZQ
24 9 Week / Identify ,set and produce good quality of injection moulding items and check the defects  classification of injection moulding machine  https://youtu.be/IE2njX3jKdk
25 9 Week / Identify ,set and produce good quality of injection moulding items and check the defects  Hand Injection Moulding machine parts and function https://youtu.be/Sfob_IdqL50
26 9 Week / Identify ,set and produce good quality of injection moulding items and check the defects  Injection moulding cycle  https://youtu.be/zxf26cPxP8w
27 9 Week / Identify ,set and produce good quality of injection moulding items and check the defects  Faults,cause and its remedies in hand injection molding process  basic knowledge of mould https://youtu.be/6L4-ZUV8Zh4
28 9 Week / Identify ,set and produce good quality of injection moulding items and check the defects  Core https://youtu.be/4T1-T_I_48E
29 9 Week / Identify ,set and produce good quality of injection moulding items and check the defects  Cavity https://youtu.be/4T1-T_I_48E
30 9 Week / Identify ,set and produce good quality of injection moulding items and check the defects  Cooling channel https://youtu.be/4T1-T_I_48E
31 9 Week / Identify ,set and produce good quality of injection moulding items and check the defects  Ejection System https://youtu.be/4T1-T_I_48E
32 9 Week / Identify ,set and produce good quality of injection moulding items and check the defects  Runner https://youtu.be/4T1-T_I_48E
33 9 Week / Identify ,set and produce good quality of injection moulding items and check the defects  Gate https://youtu.be/4T1-T_I_48E
34 10 to 11 Week / Identify ,set and produce good quality of injection moulding items and check the defects  Screw type injection moulding machine https://youtu.be/788v6464qjo
35 10 to 11 Week / Identify ,set and produce good quality of injection moulding items and check the defects  Plunger type injection moulding machine https://youtu.be/bLL5GPYh7OA
36 10 to 11 Week / Identify ,set and produce good quality of injection moulding items and check the defects  Co injection https://youtu.be/w9yH-0cx-f4
37 10 to 11 Week / Identify ,set and produce good quality of injection moulding items and check the defects  Different type of clamping system https://youtu.be/egWBqxA6wjA
38 10 to 11 Week / Identify ,set and produce good quality of injection moulding items and check the defects  Auto injection Moulding machine mould  its parts and functions https://youtu.be/b1U9W4iNDiQ
39 10 to 11 Week / Identify ,set and produce good quality of injection moulding items and check the defects  Two plate & three plate mould.hot runner mould https://youtu.be/IGFCYmSYU5Y
40 10 to 11 Week / Identify ,set and produce good quality of injection moulding items and check the defects  Processing defects causes  and Remedies (product) https://youtu.be/t0XC7km7ZsM
41 10 to 11 Week / Identify ,set and produce good quality of injection moulding items and check the defects  Trouble shooting of injection moulding machine  https://youtu.be/uWBObqn6eJI
42 12 to 13 Week / Identify ,set maintain and produce good quality of injection moulding items by using automatic injection moulding machine with moulding machine with the application  of Microprocessor control and PLC. Advantage of microprocessor control and PLC http://youtu.be/4QuNU2qf2NI
43 12 to 13 Week / Identify ,set maintain and produce good quality of injection moulding items by using automatic injection moulding machine with moulding machine with the application  of Microprocessor control and PLC. Electrical injection moulding machines http://youtu.be/v1mnBu2OUvk
44 12 to 13 Week / Identify ,set maintain and produce good quality of injection moulding items by using automatic injection moulding machine with moulding machine with the application  of Microprocessor control and PLC. Basic principles and feature of thermo set injection moulding process http://youtu.be/ekd52vmwUkA
45 12 to 13 Week / Identify ,set maintain and produce good quality of injection moulding items by using automatic injection moulding machine with moulding machine with the application  of Microprocessor control and PLC. Comparison between conventional injection moudling machine and PLC & Micrprocessor control injection moulding machine  http://youtu.be/ekd52vmwUkA
46 14 Week / Identify ,set maintain and produce good quality of injection moulding items by using automatic injection moulding machine with moulding machine with the application  of Microprocessor control and PLC. Importance of preventive maintenance https://youtu.be/qE-djQuO8LQ
47 15 Week / Identify ,set maintain and produce good quality of injection moulding items by using automatic injection moulding machine with moulding machine with the application  of Microprocessor control and PLC. Introduction about hydraulic system . http://youtu.be/RSVKzdXf1SU
48 15 Week / Identify ,set maintain and produce good quality of injection moulding items by using automatic injection moulding machine with moulding machine with the application  of Microprocessor control and PLC. Pascals law http://youtu.be/7N7z3ThMkp8
49 15 Week / Identify ,set maintain and produce good quality of injection moulding items by using automatic injection moulding machine with moulding machine with the application  of Microprocessor control and PLC. Different Hydarulic component and it function  https://youtu.be/pzUrhc_U3AY
50 15 Week / Identify ,set maintain and produce good quality of injection moulding items by using automatic injection moulding machine with moulding machine with the application  of Microprocessor control and PLC. Hydarulic Symbols of component https://youtu.be/A4O1v9gcP2A
51 16-17 Week / Produce good quality of compression moulded items and check the defects by using compression moulding machine Fault causes and remedies of product https://youtu.be/YR31Q6nPMPk
52 18-19 Week / Produce good quality of compression moulded items and check the defects by using compression moulding machine Heating system usd for mould https://youtu.be/sVIyt48fr7g
53 18-19 Week / Produce good quality of compression moulded items and check the defects by using compression moulding machine Different type of compression mould  https://www.engineeringnotes.com/industrial-engineering/plastics/moulds-used-for-compression-moulding-plastics-industrial-engineering/21123
54 18-19 Week / Produce good quality of compression moulded items and check the defects by using compression moulding machine Faults,cause and its remedies of proecessing . https://www.bip.co.uk/amp-compression-moulding.htm
55 18-19 Week / Produce good quality of compression moulded items and check the defects by using compression moulding machine Trouble shooting of compression moulding machine https://www.bip.co.uk/amp-compression-moulding.htm
56 18-19 Week / Produce good quality of compression moulded items and check the defects by using compression moulding machine introduction about transfer mouldiing process https://youtu.be/wCMUCFXA_Vo
57 20-21 Week / Identify and perform different FRP processing techniques. Intorduction of FRP https://youtu.be/8SRzafvQFyI
58 20-21 Week / Identify and perform different FRP processing techniques. Advantage of FRP https://youtu.be/Bg9rk5z_2f4
59 20-21 Week / Identify and perform different FRP processing techniques. Materials used in FRP https://youtu.be/Bg9rk5z_2f4
60 20-21 Week / Identify and perform different FRP processing techniques. Spray Up Process https://youtu.be/kH3N8SehHqM
61 20-21 Week / Identify and perform different FRP processing techniques. Vaccum Bag. https://youtu.be/hwXIvVPE1i8
62 20-21 Week / Identify and perform different FRP processing techniques. Pressure Bag. https://youtu.be/XgFEIQrz2nY
63 27-28 Week / Identify and produce good quality of blow moulding items and inspect the finished produt. Intorduction to blow moulding process. https://youtu.be/H04DIgWN3kQ
64 27-28 Week / Identify and produce good quality of blow moulding items and inspect the finished produt. List the blow moulding techniques. https://youtu.be/Oe0z6ZMt0xo
65 27-28 Week / Identify and produce good quality of blow moulding items and inspect the finished produt. Explain parts and functions of hand blow moulding machine . https://youtu.be/welGkbYFHMw
66 27-28 Week / Identify and produce good quality of blow moulding items and inspect the finished produt. Faults causes and remedies of hand blow moulding. https://www.yankangmachine.com/blow-molding-products/
67 29 Week / Perform simple pneumatic Circuits. Introduction about pneumatic system. https://youtu.be/eteFWRt8qDY
68 29 Week / Perform simple pneumatic Circuits. Pneumatic symbols of component. https://youtu.be/p8gr_uSLBo0
69 30-32 Week / Identify different parts,set and operate the blown film plant.  Auto Blow moulding machine parts and functions. https://youtu.be/6gywX6WW7r0
70 30-32 Week / Identify different parts,set and operate the blown film plant.  Cycle of Auto blow moulding process. https://youtu.be/6gywX6WW7r0
71 30-32 Week / Identify different parts,set and operate the blown film plant.  Different types of blow mould and its nomenclature. https://youtu.be/t_PgRbu1zIw
72 30-32 Week / Identify different parts,set and operate the blown film plant.  Stretch blow Moulding process. https://youtu.be/QHQPpvezXLA
73 30-32 Week / Identify different parts,set and operate the blown film plant.  Other blow moulding process (Extrusion stretch blow moulding (injection stretch blow moulding ,intermittent blow,injection blow. https://youtu.be/hjorqmWpvho
74 30-32 Week / Identify different parts,set and operate the blown film plant.  Faults causes and remedies of blow moulding. https://www.yankangmachine.com/blow-molding-products/
75 30-32 Week / Identify different parts,set and operate the blown film plant.  Required PPE https://www.ensingerplastics.com/en-in/shapes/industrial-plastics/ppe
76 33-34 Week / Identify different parts, set and operate the blown film plant. Latest extrusion techniques – (multilayer co-extruder,corrugated pipes.) https://youtu.be/VDAqufbmsDg
77 33-34 Week / Identify different parts, set and operate the blown film plant. Extrusion machine its description use different parts & function. http://youtu.be/WaB-dsB1Kfk
78 33-34 Week / Identify different parts, set and operate the blown film plant. Fault, causes Remedies of Blown film http://youtu.be/uXH_gF3XCbU
79 35-36 Week / Operate the pipe plant and produce good quality pipe PVC compounding and its chemical ingredients http://www.slideshare.net/mobile/MdAshrafAli4/feasibility-study-on-pvc -pipe-manufacturing-plant
80 35-36 Week / Operate the pipe plant and produce good quality pipe Pipe plant extrusion its units and function https://youtu.be/zGIurIy3U8s
81 35-36 Week / Operate the pipe plant and produce good quality pipe Fault, causes, Remedies of pipe http://www.slideshare.net/mobile/Hanyamer4/polymer-extrusion-problems-defects
82 37-38 Week / Operate the  reprocessing plant and produce reprocessed granules. Reprocessing of plastic https://youtu.be/2XgmjxsSYFc
83 37-38 Week / Operate the  reprocessing plant and produce reprocessed granules. Scrap grinder parts & function & its specification https://youtu.be/azksZLHxNJY
84 37-38 Week / Operate the  reprocessing plant and produce reprocessed granules. Identification code Number for different plastics and its use https://youtu.be/-HiLTRYRAHs
85 37-38 Week / Operate the  reprocessing plant and produce reprocessed granules. Description about extrusion dies & its parts. http://www.slideshare.net/mobile/Haiderabbas27/types-of-extrusion-dies-55364630
86 39-40 Week / Operate the  reprocessing plant and produce reprocessed granules. Trouble shooting of extruder http://youtu.be/eqzR1GHCgx0
87 39-40 Week / Operate the  reprocessing plant and produce reprocessed granules. Preventive maintenance of extruder http://images.app.goo.gl/21RpijkywTRErg8z8
88 39-40 Week / Operate the  reprocessing plant and produce reprocessed granules. Mono filament process https://youtu.be/pCQgdBzen6w
89 41 Week / Install and Operate thermoforming machine and identify cycle of thermoforming Produce good quality of thermoforming product  Introduction thermoforming process. https://youtu.be/0R6Oft8XOQg
90 41 Week / Install and Operate thermoforming machine and identify cycle of thermoforming Produce good quality of thermoforming product  Thermoforming cycle.    https://youtu.be/F-TVFjE3gbM
91 41 Week / Install and Operate thermoforming machine and identify cycle of thermoforming Produce good quality of thermoforming product Materials for thermoforming. https://youtu.be/k074QPKTuSo
92 41 Week / Install and Operate thermoforming machine and identify cycle of thermoforming Produce good quality of thermoforming product Heating Systems. https://youtu.be/9fpPDUceO40
93 42 Week / Install and Operate thermoforming machine and identify cycle of thermoforming Produce good quality of thermoforming product List of Different thermoforming process. https://youtu.be/0R6Oft8XOQg
94 42 Week / Install and Operate thermoforming machine and identify cycle of thermoforming Produce good quality of thermoforming product Straight vaccum Forming https://youtu.be/HWX_XxS4zY8
95 42 Week / Install and Operate thermoforming machine and identify cycle of thermoforming Produce good quality of thermoforming product Drape Forming https://youtu.be/xNR0Q-D3nH0
96 43-44 Week / Install and Operate thermoforming machine and identify cycle of thermoforming Produce good quality of thermoforming product Inline thermoforming process. https://youtu.be/EsXv4QJE4gc
97 43-44 Week / Install and Operate thermoforming machine and identify cycle of thermoforming Produce good quality of thermoforming product Comparison thermoforming and injection moulding process. https://youtu.be/dn51c3_-cAI
98 43-44 Week / Install and Operate thermoforming machine and identify cycle of thermoforming Produce good quality of thermoforming product Importance of preventive maintenance. https://youtu.be/qE-djQuO8LQ
99 45 Week / Produce good quality of rotomoulding product and check the defects. Advantage and Disadvantage & limitation of rotomoulding. https://youtu.be/WrjH3CMXqIw
100 45 Week / Produce good quality of rotomoulding product and check the defects. Rotational moulding Equipments. https://youtu.be/Mu6TO26QyWs
101 45 Week / Produce good quality of rotomoulding product and check the defects. Materials of Rotational moulding. https://youtu.be/5PXHRrYMiGQ
102 46 Week / Identify and Perform predrying process using different materials. Importance of predrying  https://youtu.be/kzBQXk1i6nY
103 46 Week / Identify and Perform predrying process using different materials. Various predrying equipments. https://youtu.be/dcpxoe_boqw
104 46 Week / Identify and Perform predrying process using different materials. Predrying temperature and time for various materials . https://youtu.be/IYYmwPyrqGk
105 46 Week / Identify and Perform predrying process using different materials. Safety observed while operating predrying equipment. https://youtu.be/hQgkLS7BGcQ
106 47 Week / Carry out different machining operations on plastic sheets/blocks.  Buffing & sanding. https://youtu.be/D61PtCBfRMU
107 47 Week / Carry out different machining operations on plastic sheets/blocks. Methods of machining of plastics. https://youtu.be/NB58SjGaOaE
108 47 Week / Carry out different machining operations on plastic sheets/blocks. Decoration of plastics. https://youtu.be/Tqi4VTFa8bk
109 Other Link Air cleaner https://www.youtube.com/watch?v=m0vHuvcpQtM
110 Other Link Air compressor, exhauster and turbocharger https://www.youtube.com/watch?v=JMj3THEK2WE
111 Other Link Blown Film Plant  http://youtu.be/cLpLksgyIOU
112 Other Link Components of the water cooling system https://www.youtube.com/watch?v=mj18OBwtlt0
113 Other Link cooling and Lubrication system https://www.youtube.com/watch?v=YvGD3l8nBjA
114 Other Link Description of diesel induction and exhaust system https://www.youtube.com/watch?v=lWQQZCZf5H8
115 Other Link Engine Lubricating system https://www.youtube.com/watch?v=vfN3DE5EJnM
116 Other Link Intake and exhaust system https://www.youtube.com/watch?v=LxpSN_kdOYk
117 Other Link manifolds and silencer https://www.youtube.com/watch?v=Owk45FL0vpo
118 Other Link mufflers https://www.youtube.com/watch?v=jCUSUycC5ZQ
119 Other Link Oil pump & filter https://www.youtube.com/watch?v=_HxTIAbrLv8
120 Other Link Three Layer Blown Film Plant (Kabra Extrusion Technik) http://youtu.be/-kcuRHPwQoY
121 Other Link Blow Moulding Machine https://youtu.be/wuNxb2FZ_tk
122 Other Link Compression Moulding Process https://youtu.be/_dPrdbfq_Tc
123 Other Link Hand Operated Blow Moulding Machine https://youtu.be/welGkbYFHMw
124 Other Link Injection Blow Moulding Machine https://youtu.be/emME1AIT7fI
125 Other Link Pipe Co-extrusion Line https://youtu.be/VDAqufbmsDg
126 Other Link Reducing Runaway Resin for Blown Film Extrusion https://youtu.be/nKCoXamZbpk
  • ITI LOGO
  • DGT LOGO
  • SKILL INDIA LOGO
  • NIMI LOGO